Discharging Lead-Acid Batteries; The Pb Discharge Menu - Multiplex MULTIcharger LN-6015 EQU Instrucciones

12.2. Discharging lead-acid batteries

Pb DISCHARGE
C= 0.1A
DEC
ENTER
DEC
Pb DISCHARGE
D=1.00A
ENTER
DEC
Pb DISCHARGE
D=1.00A
ENTER
BATTERY CHECK
WAIT PLEASE...
DCH 0:00
PB-1.00A
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
MULTIcharger LN-6015 EQU Operating Instructions
Press the DEC button to move to the Pb CHARGE menu.
2Vpack
INC
Pressing the ENTER button takes you to setting the discharge
current. You can increase this value by pressing the INC button,
or reduce it by pressing the DEC button.
2Vpack
INC
Pressing the ENTER button takes you to setting the nominal
voltage. You can increase this value by pressing the INC
button, or reduce it by pressing the DEC button.
8Vpack
Hold the START button pressed in to initiate the charge
process. You can interrupt the process at any time by pressing
the STOP button.
The MULTIcharger LN-6015 EQU now checks whether the
00000
battery is properly connected. If all is well, the charger initiates
9.005V
the charge process.

the Pb DISCHARGE menu

Page 19/24