Multiplex MULTIcharger LN-6015 EQU Instrucciones página 34

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• If you wish to charge a Lithium battery
consisting of 2S or 3S cells, connect
its balancer socket to the EQUALIZER
port marked 2~3S. Take care to
maintain correct polarity.
• If you wish to charge a Lithium battery
consisting of 4S or 5S cells, connect
its balancer socket to the EQUALIZER
port marked 4~5S. Always take care
to maintain correct polarity.
• If you wish to charge a Lithium battery
consisting of 6S cells, connect its
balancer
sockets
EQUALIZER port marked 2~3S and
the EQUALIZER port marked 6S.
Always take care to maintain correct
polarity.
!Never use the EQUALIZER Port
marked 2~3S and the EQUALIZER
Port marked 4~5S simultaneously!
Never connect two Lithium batteries
to the EQUALIZER Port of the
MULTIcharger LN-6015 EQU at the
same time.
• Set the charge parameters as required for your battery.
• Never leave your batteries on charge unsupervised.
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
MULTIcharger LN-6015 EQU Operating Instructions
both
to
the
Page 9/24

Publicidad

Tabla de contenido
loading

Tabla de contenido