6.
Specification
Input voltage
Battery types, cell counts
Charge current
(charge power)
Discharge current
(discharge power)
Trickle charge current
Integral EQUALIZER
EQUALIZER compensating current
EQUALIZER matching accuracy
Charge termination process
Charge sockets
EQUALIZER sockets
Connectors for car battery or stabilised mains
PSU
Integral screen
Dimensions
Weight
6.1.
The charger's software functions
•
Charging and discharging Lithium batteries with and without EQUALIZER Function
•
Equalizing individual Lithium battery cells
•
Charging, discharging and cycling (charging / discharging) Nickel batteries
•
Charging and discharging lead-acid batteries
6.2.
The charger's safety functions
•
Reversed polarity guard at the input and output
•
Short-circuit protection
•
Low-voltage charge cut-off to protect the car battery; user-variable threshold voltage
•
Excess input voltage protection
•
Incorrect user settings protection
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
MULTIcharger LN-6015 EQU Operating Instructions
11 – 15 V
LiPo / LiFe / LiIo:
NiCd / NiMH:
Pb:
0.1 – 6 A
(max. 70 W)
0.1 – 1 A
(max. 5 W)
0 – 250 mA
For packs comprising up to 6S LiXX cells
max. 300 mA
Approx. 5 mV
Delta-Peak cut-off for NiMH batteries (-3 mV /
cell) and for NiCd batteries (-5 mV / cell).
Constant current / constant voltage charge
process for LiXX batteries and Pb batteries.
Two 4 mm sockets
Three MULTIPLEX / FlightPower/Thunder
Power compatible connectors
Two cables terminating in 4 mm banana plugs
for direct connection to a mains PSU. Also
supplied with crocodile clips with 4 mm
sockets for connection to car battery.
LCD, two lines x 16 characters
approx. 140 x 80 x 30 mm
approx. 285 g
1 – 6S cells
1 – 15 cells
1 – 6 cells
Page 6/24