Setting The Ip Address; All Installation Methods - Axis 225FD Guia De Instalacion

AXIS 225FD Installation Guide

Setting the IP address

The AXIS 225FD is designed for use on an Ethernet network and must be
assigned an IP address to make it accessible.
AXIS IP Utility
AXIS IP Utility is the recommended method for setting an IP address in Windows. This free appli-
cation can be used on networks with or without a DHCP server. See page 7 for more information.

All installation methods

This table shows all of the available methods for setting or discovering the IP
address. Select a method from the left-hand column and check the
requirements for it to the right.
Requirements
Installation
methods
AXIS IP Utility
(recommended method)
See page 8
UPnP™
See page 9
Bonjour
See page 9
ARP/Ping
See page 10
AXIS Dynamic DNS Service
See page 11
View DHCP server
admin pages for IP address
(See note below)
Notes:
• UPnP™ and DHCP are both enabled by default in the AXIS 225FD.
• The AXIS 225FD has the default IP address 192.168.0.90
• To view the admin pages for the DHCP server, please see the server's own
documentation. You may need to contact your network administrator.
• If setting the IP address fails, check that there is no firewall blocking the operation.
• AXIS Dynamic DNS Service requires an Internet connection without HTTP proxy.
• Bonjour - applicable only in browsers with support for Bonjour e.g. Safari.
DHCP Server Install on
in network same network
segment
Optional Required
Optional Required
Optional Required
Required
Recommended
Required
Page 7
Operating system
Windows
Windows (ME or XP)
Mac OSX (10.4 or later)
All
All
All