The Axis Internet Dynamic Dns Service - Axis 225FD Guia De Instalacion

AXIS 225FD Installation Guide

The AXIS Internet Dynamic DNS Service

The AXIS Internet Dynamic DNS Service is a free service provided by Axis,
which allows you to quickly and simply install your camera. More
information about the AXIS Internet Dynamic DNS Service is available at
www.axiscam.net
To perform this procedure, your network should have an Internet connection
with no HTTP proxy, and IP addresses should preferably be assigned via
DHCP.
1. Check that the AXIS 225FD is connected to the network and that power
has been applied.
2. Wait for the Power indicator on the AXIS 225FD to show a steady green,
whereupon it will have received a dynamic IP address from a DHCP
server on your network.
3. Wait 60 seconds and push the control button on the camera once. The
Power indicator will blink amber while it connects to the AXIS Internet
Dynamic DNS service. When the registration process is complete, the
indicator will return to steady green.
4. To complete the installation, visit www.axiscam.net from an Internet
connected computer. This must be done within 60 minutes of pressing
the Control button.
5. Follow the on-screen instructions provided by the AXIS Internet
Dynamic DNS Service. You will need the product's serial number to
complete the installation. The serial number is located on the product
label. See also page 12 for instructions on how to set the password.
Important!
Please note that this procedure will send the IP address, firmware version, product type
and serial number of the AXIS 225FD to the AXIS Internet Dynamic DNS Service. No
personal information is transferred.
To remove the DNS name and unregister from this service, open the Setup
pages in the AXIS 225FD, click System Options > Network > TCP/IP >
Basic, click the Settings button for the AXIS Internet Dynamic DNS Service
and finally, click the Remove button.
Page 11