Axis 225FD Guia De Instalacion página 8

Page 8
AXIS IP Utility
AXIS IP Utility is a free Windows application that discovers and displays
Axis devices on your network. The application can also be used to manually
set a static IP address. AXIS IP Utility is available on the CD supplied with
this product, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS 225FD on the same network segment
(physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS
225FD is connected
to the network and
that power has been
applied.
2. Start AXIS IP Utility.
When the AXIS
225FD appears in the
window, double-click
it to open the
camera's home page.
3. See page 12 for
instructions on how
to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your com-
puter is connected to.
2. Click the button
serial number and IP address for the AXIS 225FD. The serial number is
located on the product label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page to access the AXIS 225FD web pages.
5. See page 12 for instructions on how to set the password.
Notes:
Set the IP address using IP Utility within 2 minutes of starting
the camera.
AXIS IP Utility can be used to change a dynamically set
IP address to a static one.
Set IP address using serial number and enter the
AXIS 225FD Installation Guide