Setting User Preferences; Applying The Cuff - Walgreens Well WGNBPW-720 Manual Del Usuario

SETTING USER PREFERENCES

1. To adjust the user preferences, press the Date/Time Set
button located on the top of the monitor.
2. The display will show a blinking ON. By default, the wrist
positioning guide is ON. To turn it OFF, press the
button.
3. Press the Date/Time Set button
show a blinking number, showing the HOUR. Change the
hour by pressing the
the number by one in a cycling manner. Pressing the Date/
Time Set button will confirm the entry.
4. Change the MINUTE, MONTH, DAY and YEAR as described
in Step 3 above, using the
and the Date/Time Set button
PM
repeat process to set HOUR, MINUTE,
MONTH, DAY and YEAR
U P
again for the display to
button. Each press will increase
button to change the numbers
to confirm the entries.
Press the button
blinking 3d ON
turn 3d OFF
confirm entry
AVG. 3
blinking HOUR
15

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc. prior to attaching
the wrist monitor. Clothing sleeves should be rolled up
and the cuff should be wrapped around bare skin for
correct measurements.
2. Apply cuff to left wrist with
palm facing up as shown in
Fig. A.
3. Make sure the edge
of the cuff is about
1/4"~1/2" (1 cm) from the
palm as shown in Fig. B.
Fig. A
Fig. B
16