Klarstein SILENT STORM Manual Del Usuario página 19

Switch on the device
Insert the plug into the socket. A beep sounds and the unit is in standby mode.
Key functions
Power button
In standby mode, press this button to start the fan at the last set speed. Press the
button while the fan is running to stop the unit and return to standby mode.
Knob
Turning the knob clockwise increases the speed from [Normal Wind 01]
upwards. Turning the knob counterclockwise decreases the speed from
[Normal Wind 26] downwards.
Mode Button
Press the button repeatedly to enter each mode in the following order: Normal
Wind > Natural Wind > Night Mode > Comfort > Quiet > Normal Wind.
Normal Wind: The wind speed is constant. When the normal wind icon is lit,
wind speed 1-26 can be set.
Natural Wind: The fan simulates natural wind, the wind speed is pre-
programmed and changes. The airflow feels as if you are out in nature.
Night mode: The fan runs at low wind speed until the timer has expired. After
that, the unit switches off automatically so that you can sleep in peace.
Comfort: The wind is automatically adjusted according to the room
temperature. If the temperature falls below 20°C, the fan stops. As soon as the
temperature rises above 20°C again, it starts again. If you select this function,
the corresponding icon lights up and the display shows "00".
Quietly: If you select this function, the motor runs particularly quietly and the
COMFORT symbol lights up. Press the button again to return to normal low
wind speed mode.
EN
19