Programs; Air Supply Blower (Optional); Anti-Calc Function; Proper Use Of Steam Function - HOESCH SteamBox 420 Instrucciones De Uso

08.07 Programs

You can program four different programs (program 1-4) in "Programs" subsection in the main menu.
By pressing [menu] button you select eg. "program 1" and can program the beginning and the end of your steam bath.
At the same time, you can set the fragrance function, if required.
You can select steam bath start up and fi nish time in 24 hours format by using [-] and [+] button.
Aromatherapy is turned on/off with [OK] button.
If one or more programs are active, and the control panel is switched into standby mode with
message appears: "Warning! Running programs are active".

08.08 Air supply blower (optional)

Fresh air blower starts automatically with the steam option switched on and turns off automatically 3 minutes after steam
bath. The blower causes better steam distribution in the steam room.
09

Anti-calc function

After 20 hours of work the device automatically calls for anti-calc function start up. The following message appears
GB
in the display: Do you want to start anti-calc function?
Warning! Before starting the anti-calc process please, make sure the suction hose is placed
in the anti-calc agent tank! See the picture in page 19!
You can select "Yes" to start the anti-calc process or "No" to start this function just after the steam bath. Before starting
the next steam bath the anti-calc process must be started, otherwise, the system will not allow to start the steam function
indicating the necessity to run the anti-calc function.
Manual decalcification
Please, enter "Service" subsection choosing menu and then press the "anti-calc" button and select "menu".
Pressing the
button.
Warning! Before you start the anti-calc process, please make sure the suction hose is in the anti-calc
agent tank! See the picture in page 19!
10

Proper use of steam function!

First you take a shower and then use the steam bath. Before any steam bath, you should take a shower, remove
traces of soap and carefully wipe the whole body.
After getting the required temperature: enter the steam cabin and close the door carefully.
Please, avoid direct skin contact with the area of the steam outlet.
15 minutes is enough! First time use the steam bath only as long as you feel comfortable. We recommend maximum 15
minutes at 40 to 50 °C. The best is taking a steam bath in the sitting position.
Steam bath duration should be controlled. You should never use more than 2-3 cycles of steam bath sequentially.
Bath with a fragrance. Using refreshing fragrance improves steam activity and pleasure of steam bath. You can add
HOESCH fragrance essences to the steam jet tank to increase steam bath effects.
Alternating shower. At the end of each steam bath: cold shower. It has a refreshing effect. If you take warm shower, you
will be relaxed and muscle tension will reduce.
Relax. The best way is to lay down and relax – this way relaxation effect and profi table steam bath effect for your body
will be strengthened.
Steam bath relaxes. The biggest advantage of steam bath is user friendly temperature from 40-50 °C and perfect
combination of heat and humidity.
Using the steam bath for children requires constant adult supervision.
Particular caution is advised when elderly and disabled person uses the steam bath.
28
and button, you can choose if you want to start decalcifi cation process and confi rm it with [OK]
button, the following