Zoom Function - LaserLiner ActiveFinder Manual Del Usuario

3

ZOOM function

Press the ZOOM button to increase
the sensitivity of the device (24 V
AC to 1000 V AC). This enables
voltage fields to be located at
significant distance by moving the
device over the area to be tested.
Please be aware that even if a visual signal is not displayed,
voltage may still be present. Differences in the design of the
!
connection socket or the nature of the insulation (thickness
and type) can affect functionality. Voltage cannot be detected
behind panels and metal covers.
4
Battery lamp
To switch on the battery lamp, press and hold down button 4.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Store the device in a clean and dry place.
Technical data
Indicator
Voltage range
Overvoltage category
Dimensions (W x H x D )
Battery
Operating temperature
Weight
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
Subject to technical alterations. 07.2016
LED
24 V AC ~ 1000 V AC
Frequency 50 ... 60 Hz
CAT III - 1000 V
(non-condensing)
Pollution degree 2
158 x 21 x 25 mm
2 x 1.5 AAA (NEDA 24A/IEC LR 03)
-10°C ... 50°C
48 g
ActiveFinder
If voltage is present, the detector
tip lights up and a signal sounds.
07
GB