Description Of The Accessories; Description Of Lights; Preliminary Checks; Checking The Appliance - DeLonghi ECAM23210B Instrucciones Para El Uso

Ocultar thumbs Ver también para ECAM23210B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Description of the accessories

(page 2 -
C )
C1. Measure
C2. Cleaning brush
C3. Descaler bottle
C4. Water softener filter (certain models only)

Description of lights

Light flashing: the machine is heating up
or a rinse cycle is underway.
The appliance is delivering two cups of
coffee.
E
"Energy Saving" mode is active.
Light on steadily: the "steam" function
has been selected;
Light flashing: you must turn the steam
knob.
An alarm is displayed on the control
panel (see the section: "Explanation of
lights").
Light flashing: the water softener filter
must be replaced.
Light on steadily: the grounds container
is missing and must be inserted in the
appliance;
Light flashing: the grounds container is
full and must be emptied.
Light on steadily: the water tank is mis-
sing;
Light flashing: there is not enough water
in the tank.
Light flashing: the appliance must be de-
scaled (see the section "Descaling").
Indicates the button to press to exit the
programming menu or selected fun-
ction.
Indicates the button to press to confirm
the function selected in the program-
ming menu.

PRELIMINARY CHECKS

Checking the appliance

After removing the packaging, make sure the
product is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De'Longhi Customer Services.
Installing the appliance
Important!
When installing the appliance, respect the fol-
lowing safety warnings:
After positioning the appliance on the
worktop, leave a space of at least 1,18 in/
3 cm between the surfaces of the appliance
and the side and rear walls and at least 5,9
in/ 15 cm above the coffee maker.
cause damage.
Do not place the appliance near taps or sin-
ks.
it contains freezes.
Do not install the appliance in a room where
the temperature could drop below freezing
point.
cannot be damaged by sharp edges or con-
tact with hot surfaces (e.g. electric hot pla-
tes).

Connecting the appliance

Important!
Check that the mains power supply voltage cor-
responds to the value indicated on the rating pla-
te on the bottom of the appliance.
If the power socket does not match the plug on
the appliance, have the socket replaced with a
suitable type by a qualified professional.
Using the appliance for the first time
Please note!
pliance and it is therefore completely normal
for there to be traces of coffee in the mill.
The machine is, however, guaranteed to be
new.
9
-

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ecam23210sb

Tabla de contenido