Installation Overview - STEINEL PROFESSIONAL HBS 200 Guia De Informacion

WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualified electrician is recommended
Package Contents
• HBS 300 (347-480V) or HBS 200 (347-480V) sensor
• Two 1/2" KO locknuts
• Installation instructions

Installation Overview

Needed for installation
• 4 wire nuts for termination
Applications
• HBS 300 (347-480V): Open
areas where 360 degree
coverage is needed such
as warehouses, distribution
centers, gymnasiums
• HBS 200 (347-480V): High bay
aisle way areas
Intended uses
• For indoor use only
• For individual fixture lighting
control
- 2 -
HBS 300 (347-480V) Product Overview
347/480
VAC PIR
60Hz
Product description
The HBS 300 (347-480V) sensor
provides effective lighting control in
high bay open area applications such
as warehouses. The sensor contains
Specifications
Voltage 347/480 VAC, 60 Hz
Load rating 5A electronic ballast load
Time delay 15 sec to 30 min
Light level .2 - 200 footcandles; 2 - 2000 lux
Coverage 360°, up to 22 ft (6.7 m) radial reach, up to 60 ft (18.2 m)
tangential reach
Environment IP20 rated, -4°F to +122°F, -20°C to +50°C
Dimensions
3.9 x 3.9 x 2.6 in; 99 x 99 x 66 mm
nipple length .62 in (15.75 mm)
5 year warranty
UL and CUL Listed, RoHS Compliant
1
2
5
ON
High
Low
1 2 3 4
4
3
1/2 inch threaded nipple Light level trimpot
1 4
Lock nuts Detection lens
2 5
Time delay setting DIP switch
3
Fixture
or J Box
IP20
Mount
360°
three dual-element pyroelectric
detectors and is engineered to perform
at a wide range of mounting heights, up
to 45 feet. It mounts directly to a high
bay lighting fixture, or to a junction box.
LC3
10ft/3m
20ft/6.1m
30ft/9.1m
40ft/12.2m
50ft 40ft 35ft 35ft
15.2m12.2m 10.7m 10.7m 12.2m
22ft 22ft
6.7m 6.7m
- 3 -
40ft 50ft
15.2m