Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONNECT DUCTWORK

1. Use (2) screws (4,8x38mm) and drywall
anchors to secure flue mounting bracket
to the ceiling or wall as shown.
2. Use 8" round metal duct to connect the
discharge collar on the hood to the
ductwork above.
3. Use duct tape to make all joints secure
and air tight.
4. Connect the upper flue to the bracket with
mounting screws (3,9x9,5mm).
5. Slide the lower flue downward, until it fits
properly around hood.
6. Secure lower flue to hood with mounting
screws (3,9x9,5mm).
FASTEN FLUE TO HOOD AND BRACKET
WITH MOUNTING SCREWS (3,9x9,5mm)
FIXING TO THE WALL
MOUNTING
SCREWS
(4,8x38mm)
FIXING TO THE CEILING
MOUNTING
SCREWS
(4,8x38mm)
- 8 -
FLUE
MOUNTING
BRACKET
FLUE
MOUNTING
BRACKET
DECORATIVE
FLUE
DUCT TAPE
8" ROUND
METAL DUCT

Publicidad

Tabla de contenido
loading

Tabla de contenido