Division of the handle switch
Installation
harness
This operation should be done
only for DL650A L2 – L4.
1. Remove the Side cover (B) and
Frame cover (C).
Remove
assembly (A) by removing 2
bolts.
(Refer to DL650A service man-
ual)
2. Remove the fixation bolt of the
radiator and move the radiator
lower.
(Refer to DL650A service man-
ual)
3. Remove the LH handle switch
coupler (10 terminals : 10 lines)
from the Radiator heat shield.
Disconnect
switch coupler.
Be careful not to damage the hook of the coupler when removing
the coupler from the Radiator heat shield.
the
body
cowling
the
LH
handle
NOTICE
GENUINE SUZUKI ACCESSORIES
(B)
(C)
LH handle switch
LH handle switch
coupler
coupler
Radiator heat shield
Radiator heat shield
FWD
FWD
Radiator
Radiator
3/10
(A)
(A)