Working With Robots - jbc HDRE-1B Manual Del Usuario

Features
2.8" Color TFT screen
Tilt the display for
easy reading

Working with Robots

Manage and monitor the station using a Robotic system.
1. Connect the tool to the station port by means of the CHB-A Converter.
2. Connect your Robot system to the Robot connector (RJ12) of the station.
DB9-RJ12 Adapter available only if necessary (Ref: 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed
4. Set your Robot's commands according to the Robot Communication Protocol,
available on the website www.jbctools.com/jbcsoftware-menu-115.html.
Robot
USB-A
connector
Converter
Ref. CHB-A
RS-232
connection
w w w.jbctools.com
Control Unit
3