Yakima SuperJoe Pro 2 Manual Del Usuario página 2

Set your vehicle specific measurement.
Refer to the Fit Guide on the product carton to find the
measurement for your specific vehicle. With both side
knobs loosened set the distance between rivets to the
measurement for your vehicle, and then tighten both knobs
completely. Be sure that the knobs have engaged fully.
Position SuperJoe Pro on vehicle.
PLACEMENT WILL VARY DEPENDING ON VEHICLE.
Upper Frame:
• The position is relative to the lower
frame and will depend on vehicle shape.
Lower Frame:
• LOWER SUPPORT FRAME LOCATION IS
EXTREMELY IMPORTANT TO THE LOAD!
• A common location is a well supported
license plate depression, just above or
below the numbers.
• Use area with the greatest support.
• Do not place the lower frame on glass,
plastic, or thin metal.
• Some SUV's, vans, and wagons have a
large section of poorly supported metal
that will dent under weight.
1033613B-2/30
space
Clean the contact points on the vehicle,
and keep the pads free of debris.
• Some bumpers and body panels can
deform or "tin-can". Do not place in these
areas. This can result in vehicle damage,
or an insecure fit.
• Do not place SuperJoe Pro on vehicle's
emblem.
no space