Use Of Remote Control; Operating Remote Control; Operating Mode Selection - Runtal 40016512 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 102

5. Use of remote control

5.1 Operating remote control

ON/OFF
2
seconds
boost
mode
LOCKING INTERFACE (child lock)
It is impossible to change the operating mode or the temperature.
It is also impossible to trigger a manual boost.
boost
Press on -
mode
and mode for
5 seconds
COMMENT:
Changes of mode ordered by a pilot wire controller (not supplied with your appliance) will not be
disabled by this function.
56
 The remote control is turned on: the controller emits
an audible signal.
 The remote control is turned off: the controller
emits two audible signals.
Turning off the remote control also turns
off the radiator or towel dryer.
Your remote control can only operate one
appliance.
boost
mode

5.2 Operating mode selection

boost
mode
FROST-FREE MODE
(recommended if premises unoccupied for more than 24
hours)
Your appliance is set to ensure a minimum temperature of 7°C in
your room, to avoid any risk of freezing.
The user cannot change this temperature setting.
The LED on the appliance is on, showing blue.
ECO MODE
(recommended if the room is unoccupied for more than
2 hours)
The economy mode can operate in 2 different ways:
- either the eco temperature is linked to the Comfort tempera-
ture;
- or the eco temperature is unlinked (independent).
See the next page for details of how each one works.
See chapter 5.5 Advanced parameters for how to link or unlink
boost
Eco temperature and Comfort temperature.
WARNING:
Your appliance operates in eco linked mode by default.
The LED on the appliance is on, showing green.
mode
40016512
11/2017
5 basic operating modes: Frost-free, Eco, Comfort,
programmes P1 & P2
boost
mode
boost
mode
57

Publicidad

Tabla de contenido
loading

Tabla de contenido