Heating Boost - Runtal 40016512 Manual De Instrucciones

6. Heating boost

This function provides extra heat when required. When activated, the appliance operates at full
power, without taking into account the temperature set on the remote control.
After being triggered, the operating time is 2 hours maximum; it can be interrupted at any time.
The LED on the appliance flashes red during a boost.
Boost operation can be activated 2 ways:
• manual boost
• programmed boost
USE OF MANUAL BOOST
time for a manual boost
boost
mode
Reduce
duration
of boost in
boost
steps of 15
minutes.
mode
66
The default
is 60 minutes.
boost
mode
Increase
duration of
boost in steps
boost
of 15 minutes
(total maximum
duration of 120
mode
minutes).
The Boost
duration is
displayed.
This function is used to set the start time for the boost, to be triggered automatically every day
at the same time (if the programme is activated).
This boost will operate during the period set in the advanced parameters (see chapter 5.5
parameter 0).
Boost will be triggered in Eco, Comfort, P1 or P2 modes, and will take over the normal operating
of your appliance.
boost
40016512 11/2017
USE OF MANUAL BOOST (continued)
The expected
duration of
the boost is
finished.
The appliance
boost returns to
normal
operating
mode
mode.
Early
exit from
manual
boost
boost.
mode
USE OF PROGRAMMED BOOST
boost
mode
boost
mode
67