How To Use; Cleaning - Vornado VMH10 Manual Del Usuario

HOW TO USE

Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of
damage. If any damage is found, contact Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on back of
heater for lifting and carrying.
2. Position heater so airflow is
not obstructed.
3. Plug power cord into standard
grounded wall outlet.
4. Select Mode by turning control dial.
Red light illuminates to indicate heater
is on. Press to set timer for 4 hours.
White LED illuminates when timer
is set.
12 English

CLEANING

Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning
the outside of the heater is recommended on a bi-weekly basis. If service is required, return your
heater to Vornado. See WARRANTY for instructions.
1. Unplug heater before cleaning.
2. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off Inlet Filter on back of heater.
3. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off Front Outlet Grill.
4. Wipe down entire heater
with soft cloth.
Note: Inlet Filter on back of heater
is not removable.
You may also clean the heater with
high-pressured air, as well.
English
13