Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide
Special functions
Early Start (Setup Function 13): Early start allows the heating or cooling to turn on before the
program start time, so the temperature is reached at the time you set.
Compressor Protection (Setup Function 15): Forces the compressor to wait a few minutes
before restarting, to prevent damage. During the wait time, the message Cool On or Heat On
(heat pumps only) will flash on the display.
Accessories & replacement parts
Please contact your distributor to order replacement parts.
Cover plate assembly* ................................................... Part Number 50002883-001
*Use to cover marks left by old thermostats.
Specifications
Temperature Ranges
•
Heat: 40° to 90°F (4.5° to 32°C)
•
Cool: 50° to 99°F (10° to 37°C)
Operating Ambient Temperature
•
32° to 120°F (0° to 48.9°C)
Shipping Temperature
•
-20° to 120°F (-28.9° to 48.9°C)
Operating Relative Humidity
•
5% to 90% (non-condensing)
Physical Dimensions
•
3-7/16"H x 4-10/16"W x 1-3/16"D
87mm H x 119mm W x 30mm D
www.resideo.com
This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502
©2019 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell International Inc. All rights reserved.
Resideo Inc., 1985 Douglas Drive North
Golden Valley, MN 55422
69-2800EFS—03 M.S. Rev. 07-19 | Printed in United States
Electrical Ratings
System
Voltage (50/60Hz)
Heat (1st stage)
(Powerpile)
Auxiliary heat
Cooling
Running Current
20-30 Vac
750 mV DC
20-30 Vac
20-30 Vac
0.02-1.0 A
100 mA DC
0.02-1.0 A
0.02-1.0 A
Publicidad
Tabla de contenido
