Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LIST OF ADVANCED FUNCTIONS (PROGRAMMABLE)
These functions must be programmed to suit the required alarm operating mode. Refer to
the ADVANCED FUNCTIONS TABLE on pages 4, 5, 6 and 7 of the programming tables.
• Immobiliser auto - rearm.
• Alarm auto - rearm.
• Auto - rearm with door locking.
• Autolock - automatic door locking.
• Autolock - automatic door locking mode.
• Automatic anti hi - jack.
• International anti hi - jack.
• AutoHazard.
• Car Finder.
• Speed Alert.
• Pager output.
• Back - up signal.
HORN / SIREN FUNCTIONS
It is possible to select an intermittent alarm horn output or the following siren sounds.
• Fixed monotone siren.
• Alternated mono - tone siren.
• Two - tone siren.
• Sweep siren type.
Please refer to the ADVANCED FUNCTIONS TABLE of the programming tables.
FUNCTIONS OF THE RADIO CONTROL BUTTONS
Button A
Button B
ATTENTION!
This product is preset to comply with EC Directives for alarm systems. The buzzer function may
only be used in non - EC countries, otherwise the approval will be invalidated.
Disconnect the negative wire from the battery prior to installation and only connect it
again after installation has terminated. This system is compatible with 12 V negative ground
vehicles.
20
06DE2143E.pmd
arms the alarm and immobiliser, cuts out the volumetric input and
supplementary sensor input, activates the panic option, allows access
to the programming function, selects the line and raises the buzzer
volume in the programming tables, activates the Car Finder option.
lowers the buzzer volume, disarms the alarm and immobiliser,
activates / deactivates the function.
20
Fitting instructions - BRIDGE 4100
07/02/2008, 15.15
Publicidad
Tabla de contenido
