Cobra BRIDGE 4100 Manual De Instalación página 24

BACK - UP SIGNAL
This function makes the buzzer of external siren operate when the reverse gear is engaged.
The boot input (WHITE / BLUE wire) must be connected to the reverse wire, configured with
positive polarity (page 2 line 8) activated.
PAGER
Negative command for controlling a Pager module.
ATTENTION! To reset the factory SET UP from any of the tables, press for 3 s
both radio control push buttons.
24
Fitting instructions - BRIDGE 4100
06DE2143E.pmd 24 07/02/2008, 15.15