KTM 59012090100 Manual Del Usuario página 5

12 Connect the remote control to the road book holder.
13 Mount the remote control on the handlebar.
14 Loosely connect the plug (included with the wiring harness) to the
wiring harness brown to GND (see road book sticker, item 12)
red/yellow to +12V (see road book sticker, item 12).
15 Loosely connect the road book holder wiring harness to the road
book holder.
16 Connect the road book holder wiring harness to the pull switch (see
arrow).
17 Dismount the seat.
18 Dismount the tank.
19 Connect the road book holder wiring harness to the main wiring
harness.
20 Mount the tank.
21 Mount the seat.
22 Remove the rubber seal from the headlight mask.
23 Mount the headlight mask on the road book support 05 with plastic
washers and the M6x20 flat head screws.
– U
SE THE PULL SWITCH TO SWITCH OFF THE ROAD BOOK HOLDER AFTER USE
( ).
POWER CONSUMPTION
5