Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To Maneuver:
1.
Align trailer and tow vehicle in a straight line on a level surface.
2.
Pull grab handle out and rotate counter clockwise to place both latch pins
in rear holes.
3.
Set trailer brakes and slowly drive tow vehicle forward until the Husky HD
Roller stops with the latch pins in the rear locked position. Both the grab
handle and locking bar latch pins should be engaged in both rear most
holes to completely lock the Husky HD Roller in place. (See pg. 11)
Front of Tow Vehicle
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support / Product Updates.
2020 Keystone Automotive Operations Inc. All Rights Reserved. 12/07/2020-Rev3
OPERATING INSTRUCTIONS
Husky HD Roller and hitch in maneuvering position.
Page-13
Publicidad
Tabla de contenido
