marklin E 10.1 Manual Del Usuario página 13

CV Discription
Multiple station announcements
Bit 0 – 3 = Number of stations
60 PoM Bit 4 = Last station reverses the sequence.
Bit 5 = Locomotive direction determines the sequence.
Bit 6 = Basic setting for sequence.
63 PoM Volume
64 PoM Brake threshold
75 Address 2 (1st consecutive address)
138 PoM Volume for sound "squealing brakes"
139 PoM Volume for sound "operating sounds"
140 PoM Volume for sound 1 (whistle)
142 PoM Volume for sound 2 (Conductor whistle)
143 PoM Volume for sound 6 (Station announcements)
150 PoM Volume for sound 11 (compressor)
152 PoM Volume for sound 13 (Letting off air)
( ) Values = factory settings
DCC: programming on the programming track by means of CV programming,
programming with PoM (Program on the Main); this must be supported by the controller you are using.
* The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in the value = 6
Betrieb • Operation • Fonctionnement
6021 Value DCC Value
—
01 – 63 (63)
—
01 – 80 (13)
—
—
—
—
—
—
—
13
0 – 127 (1)
0 – 255 (255)
0 – 255 (55)
—
0 – 255 (255)
0 – 255 (180)
0 – 255 (255)
0 – 255 (255)
0 – 255 (255)
0 – 255 (180)
0 – 255 (160)
Exploitatie • Operación • Operazione