Skoda ABA 700 002 Instrucciones De Montaje página 18

- brown/white cable (of harness C) - PIN 8
- red/green cable (of harness C ) - PIN 1
- brown/green cable (of harness C) - PIN 5
- Non-original car radio (8-pole terminal box ISO)
- blue/white cable (of harness C) - PIN 7
- brown/white cable (of harness C) - PIN 8
- red/green cable (of harness C ) - PIN 1
- brown/green cable (of harness C) - PIN 2
Insert the fitted terminal box T8d (or terminal box ISO) into the car radio terminal box.
Connect the car radio.
B-pillar cables
- Left side of the vehicle - if the T11a terminal box is included in the equipment of the
vehicle
- blue/white cable (of harness C) - PIN 9
- brown/white cable (of harness C) - PIN 8
- blue/white cable (of harness D) - PIN 9
- brown/white cable (of harness D) - PIN 8
- Right side of the vehicle - if the T11ba terminal box is included in the equipment of the
vehicle
- red/green cable (of harness C ) - PIN 9
- brown/green cable (of harness C) - PIN 8
- red/green cable (of harness D) - PIN 9
- brown/green cable (of harness D) - PIN 8
Plug the T11 fitted terminal boxes in.
Advice. If the T11 terminal boxes are not included in the equipment of the vehicle,
interconnect the cables of harness (C) and harness (D) and secure them with the help
of connecting tubes (J), as shown on Fig. 6 (during this interconnectiong make sure the
colours of the cables are correct). Seal the connecting tubes in with a hot gun.
Deep tone speaker (4-pole terminal board (F) - (socket type)
- Left side of the vehicle
- blue/white cable (of harness D) - PIN 3
- brown/white cable (of harness D) - PIN 1
- blue/white cable (of harness E) - PIN 4
- brown/white cable (of harness E) - PIN 2
- Right side of the vehicle
- red/green cable (of harness D) - PIN 3
- brown/green cable (of harness D) - PIN 1
- red/green cable (of harness E) - PIN 4
- brown/green cable (of harness E) - PIN 2
GB