How To Operate Your Ceiling Fan - Fanimation NAVY LP7678LBN Manual Del Usuario

How to Operate Your Ceiling Fan

1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
2. Install the fan pull chain and light kit pull chain.
(Figure 2)
3. Check the operation of the fan by gently pulling on
the fan pull chain. (Figure 3)
Fan Pull Chain Operating Sequence
st
1 Pull
nd
2 Pull
rd
3 Pull
th
4 Pull
4. Slide the switch to "CH" when use the pull chain to
operate the fan. Slide the switch to "RC" to operate the
fan using the optional CR500 remote control—sold
separately. (Figure 4)
High
Medium
Low
Off
14
Figure 1
Light Kit Pull Chain
Figure 2
Figure 3
Switch Housing
Figure 4
Assembly
Fan Pull Chain
Fan Pull
Chain