Automatic Mode - Noaton AP 2145 Instrucciones De Uso

EN
Colour code system for expressing air quality (see table below)
C
OLOUR OF THE STRIP
blue
green
red

7.2 Automatic mode

When the appliance is in operation, press the speed button for changing the fan speed
until the LED indicator AUTO lights up. In this mode the appliance itself switches between
fan speeds depending on current air quality. The worse the air quality, the higher the
selected fan speed, and vice versa.
If a room contains air with high humidity, water may condense on the air quality sensor. In
such cases the sensor will assess the air quality as bad and, in AUTO mode, the appliance
will run the fan at maximum speed. If this happens, switch off the appliance, unplug the
power cord, and wipe the sensor with a soft dry cloth.
A
IR QUALITY
good
average
bad
46
EN
Current
number of
particles in the
air