Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEAM FEATURES
WARNING:
• Do not open the dryer
door during
Steam Cycles.
Steam
can cause severe burns.
• Do not fill the steam feeder
with gasoline,
dry cleaning
solvents,
or other flammable
or explosive
substances.
They give off: vapors
that could
explode.
"Do not drink water
from the steam feeder.
• Do not fill the steam feeder
with hot water
(over
86°F/30°C).
Do not touch
the steam nozzle
in the drum during
or
after
the steam cycle.
Using the STEAM
REFRESH cycle
The STEAM
REFRESH cycle uses the power
of steam to
quickly
reduce
wrinkles
and odor in fabrics.
It brings
new life to wrinkled
clothes that
have been stored
for
an extended
period
of time, and it can make
heavily
wrinkled
clothes
easier to iron. STEAM
REFRESH can
also be used to help reduce
odors
in clothes,
such as
clothes
that were worn in a room where people
had
been smoking.
This cycle
can refresh
from one to five
garments,
or one bulky item such as a comforter.
Use
for one to three garments
and _
for four or five
garments.
For these settings, the dryer
tumbles
without
heat while
the water
in the steam generator
is heated.
Once
steam begins
to flow, the dryer
will only tumble
for about
three
seconds every
minute.
Best results are
achieved
with 70/30
cotton//polyblend
fabrics.
The b 19 (big) setting should be used for bulky items,
such as comforters. For this setting, the cycle begins
with a heated dry segment fo!lowed by a shorter steam
segment, as above.
NOTE:
The STATIC SHIELD option
can be used together
with the STEAM
REFRESH cycle
to help prevent
static electricity
after
the cycle.
_)
Turn the dryer ON and select the STEAM REFRESH
cycle.
0
Select
the STATIC SHIELD option,
if desired.
The default number of garments is three. Press the
MORE TIME or LESS TIME button to adjust the load
size, as described above.
O
Press the START/PAUSE button to start the cycle,
IMPORTANT
NOTES
ABOUT
STEAM FUNCTIONS:
• Steam
may not be clearly
visible
during
the steam
functions.
This is normal.
. Do not use Steam
Refresh with
items such as wool,
wool
blankets,
leather
jackets,
silk, wet clothes,
lingerie,
foam
products,
or electric
blankets.
• For best results, load articles
of similar
size and fabric
type.
Do not overload.
"If
the home's exhaust
system is restricted,
the
performance
of the steam functions
will be reduced.
• During
steam operation,
the clothes
will tumble
for
only a few seconds,
once a minute.
. The steam feeder
must be filled
with water
up to the
MAX
line. Otherwise,
the ADD WATER light
may illuminate.
STATIC SHIELD
This option
uses steam
late in the drying
cycle to reduce
the static electricity
caused
by dry fabrics
rubbing
together.
Change
the steam time by pressing
the MORE
TIME and LESS TIME buttons
to display
the approximate
number
of articles
in the load:
7_ 9, 11, 14, 16 or 18.
Steam
time is approximately
t-6 minutes,
depending
on
the number
of garments
selected.
NOTE:
When
STATIC SHIELD is added
to auto
dry
cycles,
the LESS and
DAMP dry levels cannot
be selected.
EASY IRON
The EASY IRON option
provides
uniform,
properly
dampened
fabrics
for ironing,
which
can save time and
make
ironing easier. Change
the steam time by pressing
the MORE
TIME or LESS TIME button,
depending
on the
number
of garments
in the load:
1, 2, 3, 4, or 5. Steam
time is approximately
4-9
minutes,
depending
on the
number
of garments
selected.
NOTE: When using the STATIC SHIELD or EASY IRON
options with timed dry cycles, always adjust the dry
time before selecting the option. Once the option is
selected, the MORE TIME and LESS TIME buttons adjust
the number of garments, rather than the cycle time.
These buttons are disabled once the cycle is started.
If the STATIC SHIELD or EASY iRON option is selected
with the STEAM REFRESH cycle, the MORE TIME and
LESS TIME buttons will function as described for the
options, rather than the STEAM REFRESHcycie.
26
Publicidad
Tabla de contenido
