Principle Of Operation; Installation Instructions - STEINEL Studioline 400 Instrucciones De Montaje

L400_10spr.qxd 31.07.2008

Installation Instructions

GB
Lights, alarms, and many
other things triggered by
movement – for your con-
venience and safety.

Principle of Operation

The built-in pyroelectric
infrared detector detects
the invisible heat radiation
that is emitted by moving
bodies (people, animals,
Focal points and angle of
sight of the 360° STEINEL
lens (with 120° angle of
aperture).
a) sensor lens directed
forwards.
12 m
(40 )
wall
Monitoring zone A
8
13:51 Uhr Seite 9
At the front door, garage, can be installed and ready
terrace or carport, in a for operation quickly any-
stairway, storeroom or where.
basement, this SensorLamp
etc.). This thermal radiation riers such as walls or
is converted electronically, planes of glass. The fixture
and switches on the light is not switched on.
fixture. No thermal radiation
is detected through bar-
The most reliable motion
detection is achieved by
mounting or pointing the
unit to aim across the
direction in which a person
would walk, and so that no
hindrances such as trees or
walls obstruct the line of
sight.
Important: Teh max. reach
is best achieved if the top
row of lens segments is
positioned directly under
the housing.
b) sensor lens directed c) sensor lens directed
downwards.
4 m
(12 )
wall
Monitoring zone B Monitoring zone C
backwards.
1m (3 )
wall