Olivetti Artjet 22 Guia De Instalacion página 13

Replacing print heads
1. With the printer idle (in standby),
(a) open the Printer Care tab in the Printer
Monitor and click on the Change button,
or
(b) press and hold
press once; release the two buttons
together.
2. Open the top cover: the print head carriage
will be in the head loading position.
3. Press the print head release lever to release
either:
(a) the black print head, or
(b) the colour print head.
10
on the operator panel and
4. Pulling upwards by the thumb and finger grip:
(a) remove the black print head,
(b) remove the colour print head.
5. Insert a new print head of the SAME type
(black/colour) and close the printer cover.
6. Click on the appropriate New Head button in
the Printer Care tab in the Printer Monitor
and then run the Align function in the same
tab.
Installation Guide