Olivetti Artjet 22 Guia De Instalacion página 12

DOS environment
Although optimised for operation in a Windows®
environment, your printer will also operate in
DOS, recognising PCL III + command codes.
This means that you can print from any DOS
application that supports this command code set.
qHow to change the printer settings in DOS
environment
With your printer connected and switched on,
insert the CD in the reader on your PC. From the
DOS prompt, type d:\config.exe (where "d" is the
CD driver). Follow the instructions displayed on
your PC screen.
Installation Guide
Disinstalling the printer driver
If you have problems printing that are not solved
with normal printer care operations (paper and
print heads inserted correctly, appropriate
selections in the printer driver, etc.), it may be
necessary to re-install the printer driver.
To do this, you must first disinstall the driver, by
clicking on the specific icon created in the printer
group when you first loaded the driver. This
allows a complete and correct removal of all the
files loaded from the CD and/or created in your
PC during driver installation, permitting a correct
re-installation (see "Installing the printer
software").
To disinstall the driver in Windows 98 USB
environment, you must first disconnect the
USB interface cable from the printer and then
run the "ol22usbu.exe" file from the
Windows\System\ directory.
Disinstallation of the driver in Windows 2000
USB environment is done from Control Panel
\ Add/Remove Program \ .
For other problems regarding the use of print
heads, printing media, etc., refer to the
s p ecif ic t opics in t he Troubleshooting
s e c t i o n o f t h e On-Line documentation
loaded with your printer driver.
GB
9