Cd/Md Changer; Playing A Cd Or Md - Sony CDX-C460 Manual De Instrucciones

With Optional Equipment

CD/MD Changer

You can control up to 7 CD and MD changers
with this unit.

Playing a CD or MD

1
Press (SOURCE) repeatedly to select CD
or MD.
2
Press (MODE) until the desired changer
appears (for example CD2 or CD3).
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
Elapsed playback time
Disc name*
Track name*
Clock*
1
If there is no prerecorded name for a CD or MD, "NO
*
NAME" appears in the display.
2
If the track name of an MD is not prerecorded, "NO
*
NAME" appears in the display.
3
If the dual information function is on, the clock does not
*
appear in the display.
Tip
If the name of the MD is too long, you can scroll it across
the display window by pressing (SHIFT), then (1) (N).
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 8 characters and the Auto Scroll
function is on, automatically scrolls on the
display as follows:
• The disc name appears when the disc has changed (if the
disc name is selected).
• The track name appears when the track has changed (if
the track name is selected).
• The disc or track name appears depending on the setting
when you press (SOURCE) to select an MD.
$
$
1
$
2
$
3
If you press (DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "A.SCRL" appears.
2
Press (4) (n) to select "A.SCRL-ON."
3
Press (SHIFT).
To cancel Auto Scroll, select "A.SCRL-OFF" in
step 2 above.
Displaying the recording date of
the currently selected MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you
want to skip.
To locate succeeding tracks
SEEK
AMS
To locate preceding tracks
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
To search forward
SEEK
AMS
To search backward
Locating a disc by disc number
— Direct Disc Selection
Press the number button corresponding
to the desired disc number.
The desired disc in the currently selected
changer begins playback.
EN
11