Yamaha BRX-610 Manual De Instrucciones página 40

Ocultar thumbs Ver también para BRX-610:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 274
SETUP MENU
■ Playback
[Closed Caption]
You can set to display the closed caption (p. 50) when a
BD/DVD disc with closed caption is played back.
*
On, Off
[Angle Mark]
You can set to display the Angle Mark (
DVD disc with multiple angles is played back.
*
On
, Off
[PIP Mark]
You can set to display the PIP Mark (
disc with picture in picture (p. 27) is played back.
On
*
, Off
[Secondary Audio Mark]
You can set to display the Secondary Audio Mark (
when a BD disc with secondary audio is played back.
*
On
, Off
[Last Memory]
You can set whether this unit remembers the last playback
position of a disc when it is set to standby mode or the disc
tray is opened.
*
On
, Off
Note
Some discs are not compatible with this function.
■ Security
[Change Password]
You can set the password for changing the Parental
Control Level and Country Code. Refer to "[Parental
Control]" (p. 36) and "[Country Code]" (p. 36).
Notes
• The default password is 0000.
• If you forget the password, refer to "TROUBLESHOOTING"
(p. 42) and set all the Security settings to their default settings.
[Parental Control]
In some BD/DVD discs, a control level for disc viewing is
set depending on the age of the viewer. You can set the
Parental Control shown on the screen depending on the
disc content.
The password (refer to "[Change Password]" on page 36)
needs to be entered before the Parental Control Levels is
set.
After you set the Parental Control, when you play back a
disc with level higher than current Parental Control Level,
or you want to change the Parental Control Level, a dialog
box will pop up to ask you to enter the password.
Off*, 1 to 8
36
En
[Country Code]
You can set the Country Code you live in. The password
(refer to "[Change Password]" on page 36) needs to be
entered before the Country Code is set. This setting may
be used for rating of the Parental Control and disc
playback.
■ Network
) when a BD/
[Internet Connection]
You can set to [Enable] when you use BD-Live (p. 27),
DLNA (p. 22) and software upgrade from the network
(p. 41).
) when a BD
Enable
[Information]
You can display network information screen. On this
screen, you can view the information of Interface
)
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
[Connection Test]
You can perform an internet connection test. If the test is
failed, please check [IP Setting] (p. 36) and perform the
test again.
[IP Setting]
You can configure the network settings.
Auto*
Manual
y
• Numeric buttons Enters characters.
• 2/3
• CLEAR
• ENTER
[BD-Live Connection]
You can set access restriction to BD-Live contents.
Permitted
Partial
Permitted
Prohibited
[DLNA]
You can set the DLNA (p. 22) to [Enable]/[Disable].
When you do not use the DLNA function, set to [Disable].
Enable
[Proxy Setting]
You can set Proxy Setting. Set to [Disable] for normal use.
Set to [Enable] to set the proxy setting.
Enable
Disable
Proxy Host
Proxy Port
*
, Disable
Select to automatically configure the network
settings of this unit with the DHCP server.
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Moves the highlight.
Deletes a character.
Saves the settings and exits from the menu.
Allows all BD-Live discs to connect the network.
Allows only discs with owner certification.
*
Prohibits all BD-Live discs to connect the network.
*
, Disable
Enables proxy host and proxy port setting.
*
Sets proxy server to disable. Select this item when
proxy server is not used.
Sets proxy host.
Sets proxy port.

Publicidad

Tabla de contenido
loading

Tabla de contenido