Network And Usb Connection; Connecting To The Network Terminal; Connecting To The Usb Port - Yamaha BRX-610 Manual De Instrucciones

Ocultar thumbs Ver también para BRX-610:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 274

Connecting to the NETWORK terminal

• PC contents can be played back by connecting this unit to the network.
• You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 27 for information on BD-Live functions.
Notes
• Firmly connect a network cable (commercially available) to the NETWORK terminal.
• Use only an STP (shielded twisted pair) network cable.
• When using the internet, a broadband internet connection as shown below is required.
• Connect the other connector of the network cable to the hub/broadband router.
• When using a broadband internet connection, a contract with an internet service provider is required. For more details, contact your
nearest internet service provider.
• Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on
your internet environment.
• Use a network cable/router supporting 10BASE-T/100BASE-TX.

Connecting to the USB port

• You can connect a USB memory device (2 GB or
greater and formatted with FAT 32/16) for BD Local
Storage to the USB port on the rear panel (or front
panel) of this unit to save the BD-Live data (p. 27) or to
upgrade the software of this unit (p. 41).
• Firmly connect a USB memory device (commercially
available) to the USB port.
CAUTION
• Do not remove the USB memory device or unplug the power
cable while the operations for BD-Live or software upgrade are
being performed.
• Do not use a USB extension cable when connecting a USB
memory device to the USB port of this unit. Using a USB
extension cable may prevent the unit from performing correctly.
Notes
• Yamaha cannot guarantee that all brands' USB memory devices
will operate with this unit.
• For more notes on using USB memory devices, refer to
page 18.
■ After connecting
• When you set the Network setting manually, refer to "Network" (p. 36).
• To play back the PC contents on your network, refer to "Using network content" (p. 22).

NETWORK AND USB CONNECTION

This unit
To USB
port
USB memory
device
(commercially
available)
y
To save BD-Live data on the USB
memory device on the front
panel, set [Local Storage] to
[Front USB] (p. 35).
Modem
Internet
broadband router
To NETWORK
terminal
Network cable
(commercially
available)
To LAN
terminal
LAN
Hub or
PC
15
En

Publicidad

Tabla de contenido
loading

Tabla de contenido