PEERLESS SA730P Instalación Y Montaje página 6

• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
Insert two M4 x 12 mm screws (D) into top two holes of
2
screen, leaving approximately 1/4" of exposed thread. Hook
screws onto keyslots of adapter plate as indicated in figures
2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20 mm
screws (E) with two retaining spacers (F) into top two holes
of screen as indicated right.
FOR VESA ® 75
MOUNTING PATTERN:
Insert one M4 screw (D or E) through bottom hole of
3
adapter plate as shown in figure 3.1.
FOR VESA 100
MOUNTING PATTERN:
fig. 2.1
WARNING
*For screens with
a hole pattern in a
pocket, spacers (F)
go between adapter
plate and screen.
fig. 2.2
ADAPTER
PLATE
fig. 3.1
6 of 29
F
D
D or E
ISSUED: 05-09-05 SHEET #: 095-9224-9 12-05-09
1/4"