Deleting Readings - GERATHERM active control+ Manual Del Usuario

Functions

Deleting readings

1. Press and hold the "MEM" button for about 3 seconds when the unit is already
in memory mode.
The user and "dEL ALL" (delete all) appears on the display.
2. Press the "MEM" button to confirm the deletion process. "dEL dOnE" (deletion
done) appears on the display.
3. To check whether the deletion process was successful, press the"MEM" button.
"0" should appear on the display.
Note:
To leave deletion mode without deleting readings, press the "START" button.
49
EN