OPERATIOn
USING THE CORD RETAINER (See Figure 5)
This dethatcher is equipped with a cord retainer (1) in order to prevent the extension cord (2) from
disconnecting from the power cord while the dethatcher is in use. The cord retainer hangs from
the cord guide bar.
NOTE: Do not plug the extension cord into the outlet until it has been connected to the cord retainer and
plugged into the dethatcher.
To use the cord retainer:
• fold the extension cord in order to form a tight loop near the retainer.
• Push the loop through the bottom hole in the retainer.
• Slide the loop over the retaining clip, and pull it down until the cord is secured.
Extension cord
Retainer
Fig. 5
Fig. 5
14