Dreame Robot Vacuum-Mop F9 Manual De Instrucciones página 18

FAQ
Problem Type
Vacuum-mop does not turn on
Vacuum-mop does not recharge
Vacuum-mop does not return to charging dock
Vacuum-mop is malfunctioning
Vacuum-mop makes a strange noise
Vacuum-mop no longer cleans efficiently or
leaves dust behind
Vacuum-mop cannot connect to Wi-Fi
16
Battery level is low. Recharge the vacuum-mop at the charging dock, then try again.
The ambient temperature is too low (below 0°C) or too high (above 50°C). The operating
temperature of the vacuum-mop is 0°C to 40°C.
The charging dock is not receiving power. Please confirm that both ends of the power cord are
plugged in correctly.
Poor contact, clean the charging contacts of the charging dock and the vacuum-mop.
There are too many obstructions around the charging dock. Place the charging dock in a more
open area.
Please clean the dock's signaling area.
Turn off the vacuum-mop and then reactivate it.
A foreign object might be caught in the brush, side brush, or one of the main wheels.
Stop the vacuum-mop and remove any debris.
The dust bin is full. Please clean it.
The filter is blocked. Please clean it.
A foreign object is caught in the brush. Please clean it.
Wi-Fi signal is weak. Make sure the vacuum-mop is in an area with good Wi-Fi coverage.
There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest
version of the app, then try reconnecting.
Solution