Changing The Filter - Bosch ergomaxx professional BSG 8 Serie Manual Del Usuario

Changing the filter

14
Replacing the dust bag
If the dust bag change indicator lights up brightly
and uniformly when the nozzle is lifted from the floor
and the vacuum is on its highest setting, you
should change the dust bag, even if it is not yet full.
In this case it is essential to change the dust bag due
to the type of material it contains.
Turn the dust compartment locking lever in the
direction of the arrow to open the dust compartment
cover.
Seal the dust bag by pulling the sealing strip and then
remove it.
For increased uptake of dust, even if the dust bag
is already part-full, we recommend the use of
replacement filter type BBZ41FP.
Place a new dust bag in the holder and close the dust
bag compartment cover.
Caution: The dust bag compartment cover will
!
only close when the dust bag, textile filter or dust
collector has been inserted.
If the dust bag change indicator continues to
light up after the dust bag has been changed,
please check whether the nozzle, pipe or
vacuum hose are obstructed.
en