Maintenance And Cleaning - UFESA CP6550 Manual De Instrucciones

fig. 4
fig. 5
HOW TO TRIM HAIR

MAINTENANCE AND CLEANING

Unplug the product when you do not intend to use it for an extended period of time to prolong its shelf-
life. Allow the device to cool down prior to storage.
Apply a drop of oil on one of the edges of the blades for their maintenance, and turn on the device for
a few seconds to distribute it. This should be done when you notice a certain amount of difficulty during
the trimming operation (Fig 3)
fig. 3
16
In order to remove the cutting brush, pull upwards (fig. 5)
This model offers the option of emptying it, moving to the emptying function
side (I) and the comb is raised, where this function along with the desired
cutting length allows allow you to shave the scalp without cutting all of your
hair
Select the 0(B) on switch in order to turn off the product before you disconnect
the device from the mains.
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical products
must never be used for the same.