Cleaning And Maintenance; Applying Lubricating Oil To Cutting Blades - UFESA CP6500 Manual De Instrucciones

Cleaning and maintenance

Before cleaning, make sure the appliance is OFF and unplugged.
1
Remove the attachment from the appliance (see PLACING, REMOVING
& REPLACING ATTACHMENTS).
2
Wash the attachment under running water and dry thoroughly.
CLEANING THE CUTTING HEAD
Remove the cutting head when cleaning is required.
1
Place your thumb on the cutting head and push forward, until it comes out of
the mounting.
2
Remove any hair from the cutting element using the brush supplied with the product.
3
Replace cutting head on the appliance. To do so, insert the lug of the cutting head
into the slot on the housing of the appliance.
4
Press gently forward until you hear a click indicating that the component is
securely in place.

APPLYING LUBRICATING OIL TO CUTTING BLADES

If the appliance is used regularly, lubricate cutting blades
periodically with the oil supplied with the product or with any
acid-free lubricating oil (e.g. sewing machine oil).
1
Remove the attachment (see PLACING, REMOVING & REPLACING
ATTACHMENTS).
2
Place your thumb on the cutting head and push forward, until it comes out of
the mounting.
F
G
H