Kyocera TASKalfa 400ci Guía De Uso página 27

Conveyor / Inner Tray
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the top cover and remove the jammed paper.
3
Close the top cover and re-install the finisher back
into position on the machine.
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the conveyor
section to the inner tray.
NOTE:
If frequent jamming occurs in the conveyor or
inner tray, the paper may be excessively curled. Adjust
curling referring to page 31 for when output pages are
curled.
1
Open the tray C and front cover.
2
Turn the conveyor knob (D2) to the left to feed the
paper along to enable easy removal.
3
Follow step 3 onward on page 22 to remove
jammed paper.
English
25