Kohler K-1954 Guía De Instalación Y Cuidado página 12

6. Connect the Module - Canister Style
Connect the Module
Position the canister so a connection point is aligned with the
wheel.
Attach the small clip to the canister.
Remove the large clip from the chain.
Run the chain from the canister to the attachment point on the
wheel.
Grasp the chain at the attachment point and attach the large clip
to that chain link.
Confirm Operation
Manually turn the wheel and observe the canister.
Confirm the canister lifts clear of the base when the chain
connection on the wheel is at the highest point.
Confirm the canister is fully sealed when the wheel is at its
lowest point.
Adjust the clip and add or remove slack if needed.
1216369-2-D 12 Kohler Co.