Check Operation - Kohler K-1954 Guía De Instalación Y Cuidado

8. Check Operation

Flush the toilet repeatedly using the module.
Observe the chain and flapper or canister.
Does the flapper/canister lift high enough to flush? If not, adjust
the chain tighter as needed.
IMPORTANT! If the canister spins when flushed, add 1-2 links of
slack to the chain.
Does the flapper/canister fully close when the flush cycle is
complete? If not, adjust the chain to add slack as needed.
Does the canister spin when being raised or lowered during the
flush cycle? If yes, add slack to the chain.
If the handle is still attached, does the chain from the handle
interfere with the flushing action when the touchless flush is
activated? If yes, you may need to disconnect the handle.
Observe the movement of the wheel.
Does the wheel come in contact with anything when rotating?
Adjust the location as needed.
For installations with the handle in place, flush the toilet using
the handle. Confirm the handle chain and module chain do not
interfere with each other.
Turn the water supply back on. Allow the tank to fill.
Confirm operation with a full flush.
Kohler Co. 15 1216369-2-D