Complete The Installation - Kohler K-2440 Manual Del Usuario

Open the
access panel.

4. Complete the Installation

Open the access panel on the bottom of the shelf by removing the
screws.
Secure the faucet spout and handle to the shelf. Refer to the
faucet manufacturer's instructions.
Slide the shelf over the wall-mounted hanger.
Secure the shelf to the wall-mounted hanger with the screws
provided.
Attach the supply hoses to the supply stops as directed in the
faucet installation guide.
If applicable, fixture-mount the angle-poise mirror. Refer to the
angle-poise mirror manufacturer's instructions.
Tuck the plumbing lines into the access panel. Do not kink the
plumbing lines.
Close the access panel and reinstall the screws.
Turn the water on, then check for leaks.
Make sure the water stream is directed to the center of the
lavatory. Adjust the direction of the water stream as needed. Refer
to the faucet manufacturer's instructions for adjustment methods.
1059558-2-A
Hanger
Screws
Screw
6
Shelf
Kohler Co.