Convergence 1; Convergence 2 - Panasonic PT-51G36 Instrucciones De Operación

S F
PECIAL EATURES

Convergence 1

In SET UP menu select CONVERGENCE under OTHER ADJ. only after moving the PTV to
adjust for the effects of the earth's magnetic field on the projection tubes.
Note:
Use the navigation buttons to align the horizontal and vertical green lines on screen with the
outside reference marks, as shown below. Press the ACTION button to move the RED
CONVERGENCE screen.
Use the navigation buttons to align the red cross with the white cross pattern at the center of the
screen. Press the ACTION button to continue to the blue convergence adjustment screen and
repeat.
Note:
18
IDIOMA/
LANGUE
PROG CHAN
CC
OTHER ADJ.
Convergence seldom needs adjusting except after moving the PTV.
Reference Marks
To prevent picture tube damage do not leave test pattern on for an extended period of
time.
An adjusted cross pattern appears white with a
minimum of color fringing.
AUTO POWER ON
CONVERGENCE
CONVERGENCE
CONVERGENCE
GREEN
NEXT : ACTION
CONVERGENCE
RED
NEXT : ACTION
Convergence Adjustment
OFF
1
2