Displaying Measured Values - Phoenix Contact EMpro EEM-MA400 Instrucciones De Montaje Para El Instalador Eléctrico

The corresponding configuration menu is displayed for the communication module used. For the necessary
configuration settings, please refer to the corresponding user manual for the measuring device,
at www.phoenixcontact.net/catalog.
Configuration mode:
Mains types:
Current transformer:
Measuring time for currents to
calculate MAX values:
Measuring time for real power to
calculateMAX values:
Reset measured values / times:
LCD display:
Operating hours counter:
see extension module
Serial number:
Software version:
Figure 12 Flow chart
5.3

Displaying measured values

The measured values are accessed via pushbuttons.
By pressing the appropriate pushbutton several times, further measured values can be displayed within the
selected menu. For additional information, please refer to the corresponding user manual.
Pushbutton Displays...
I Currents, total harmonic distortion (THD) of currents
U F Voltages, frequency, total harmonic distortion (THD) of voltages
P PF Power, power factor (PF)
E Power
104512_en_02
100
4NBL, 3NBL, 4BL, 3BL, 2BL , 1BL
Set primary current
20' min; 30' min; 60' min; 2'' sec; 5' min; 8' min; 10' min; 15' min
20' min; 30' min; 60' min; 2'' sec; 5' min; 8' min; 10' min; 15' min
I: Maximal value of the currents
P: Maximal real power value
EA: active energy (+kWh)
ER: reactive power (+kVArh)
HOUR: operating hours counter
AUX: illuminated, if supply voltage is available
I: illuminated, if current is being measured
U: illuminated, if voltage is being measured
for AUX: Illumination goes out automatically after 2 minutes.
The display is illuminated again after pressing any key.
AUX: activated, if supply voltage is available
I: activated, if threshold value is set (input current)
U: activated, if threshold value is set (input voltage)
Threshold value: I / U
▼
Press until you reach menu item Ser l :
serial number is displayed
▼
Press until you reach menu item SOFt:
software version is displayed
Yes; No
Set value
PHOENIX CONTACT
English
9