5. How to Wire Your Ceiling Fan
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
5.1
Connect the Green Grounding Wire from the
Hanger Ball and the Green Grounding Wire
f r o m t h e H a n g e r B r a c k e t t o t h e G r o u n d i n g
Conductor of Supply (this may be a bare wire
or wire with green colored insulation) . Securely
connect Wires with Wire Connectors (supplied)
(Figure 23) .
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
5.2
NOTE: If you are using an Emerson Light Fixture
with your Fan, see Light Fixture Owner's Manual for
wiring.
Securely connect the Fan Motor White Wire to the
Supply White (neutral Wire using Wire Connector
(supplied) (Figure 24) .
GROUND
CONDUCTOR SUPPLY
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 23
Figure 24
Please contact 1-800-654-3545 for further assistance
15
SUPPLY WHITE
(NEUTRAL)
LISTED WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
emersonfans.com
U.L. Model No.: CF542 & CF552