Emerson VERANDA CF542ORB00 Manual Del Usuario página 7

3. Ceiling Fan Assembly
3.6
Position the Switch Housing Assembly Bracket on the
Adapter Plate so that the Two Screws mate with the
Two Switch Housing Assembly Bracket Keyhole Slots
with Rubber Cover .
Turn the Switch Housing Assembly Bracket Clockwise
and tighten both M4 x 10mm Serrated Pan Head
Screws (Figure 6) .
Reinstall the previously removed M4 x 10mm Serrated
Pan Head Screw in the remaining Switch Housing
Assembly Bracket Hole .
A spare M4 x 10mm Serrated Pan Head Screw is
provided in parts bag, if needed .
3.7
Engage the Switch Housing Assembly Connector with
the Motor Connector (Figure 7) .
The Two Connectors are Keyed and Color-Coded and
must be mated correctly (color-to-color) before they can
be engaged .
Make sure the Connector Latch closes properly .
WARNING
!
If an accessory light kit is not being used, verify that
the wire connectors on the white and blue wire wire in
the switch housing assembly are present and tight.
(continued)
ROTATE SWITCH HOUSING ASSEMBLY
BRACKET CLOCKWISE TO ENGAGE
TWO KEYHOLE SCREWS
Figure 6
SWITCH HOUSING
ASSEMBLY
Figure 7
Please contact 1-800-654-3545 for further assistance
7
REINSTALL & TIGHTEN ONE
M4 x 10mm SERRATED PAN
HEAD SCREW
TIGHTEN TWO
M4 x 10mm
SERRATED
PAN HEAD
SCREWS
SWITCH HOUSING
ASSEMBLY BRACKET
BLUE AND WHITE
WIRES AND
CONNECTORS
SWITCH HOUSING
ASSEMBLY CONNECTOR
MOTOR CONNECTOR
emersonfans.com
U.L. Model No.: CF542 & CF552